Ezi-IO-PE-■16□-E / Ezi-IO-PE-I8O8□-E Series
Settings and Operation
Status LED
- 1. Status LED
-
Indication Color Function ON/OFF Condition PWR Red Power input indication Turn on when power is applied RUN Green Display module status Flashing when normal operation Link1, 2 Green Link Status Turn on when Link is activated ACT1, 2 Yellow Activity Status Flashing when communicating 0~15
0~7/0~7Green I/O status indication Input Module : Turn on when input signal is ON
Output Module : Turn on when output signal is ON
Switch
- 1. Ethernet IP Display and Setting Switch(SW1, SW2)
-
It can be set the value of the fourth digit of Ethernet IP through the setting switch. Set the product’s IP not to overlap with the connected products. The first, second and third values of IP can be set through the GUI. Please refer to the manual for details. When the switch is set to 255 (FF), IP is automatically set, ignoring the setting. (DHCP function).
Example) in case SW2=5, SW1=7
5×16 + 7×1 = 87
therefore, IP 192.168.0.87 
Connector
- 1. Power Connector(CN1)
-
NO. Function I/O 1 24VDC Input 2 GND Input ＊Be sure to supply power which is suitable for the load of I/O and control. 
- 2. I/O Connector(CN2)
-
NO. Function I/O 1 24VDC Output 2 NC ---- 3 GND Output 4 SIGNAL I/O 
- 3. Ethernet Communication Connector(CN3, CN4)
-
NO. Function 1 TD+ 2 TD- 3 RD+ 4 ---- 5 ---- -
NO. Function 6 RD- 7 ---- 8 ---- Connector
hoodF.GND 
Connector Specifications
- Connector specifications for cabling to module.
-
Purpose Item Part Number Manufacturer Power(CN2) Terminal Block MC421-38102 DECA I/O(CN1) e-CON Plug Connector CNE-P04-YW Autonics - ※ Above connector is the most suitable product for the module applied. Another equivalent connector can be used.
Ezi-IO-PE-■16□-T / Ezi-IO-PE-I8O8□-T Series
Settings and Operation
Status LED
- 1. Status LED
-
Indication Color Function ON/OFF Condition PWR Red Power input indication Turn on when power is applied RUN Green Display module status Flashing when normal operation Link1, 2 Green Link Status Turn on when Link is activated ACT1, 2 Yellow Activity Status Flashing when communicating 0~15
0~7/0~7Green I/O status indication Input Module : Turn on when input signal is ON
Output Module : Turn on when output signal is ON
Switch
- 1. Ethernet IP Display and Setting Switch(SW1, SW2)
-
It can be set the value of the fourth digit of Ethernet IP through the setting switch. Set the product’s IP not to overlap with the connected products. The first, second and third values of IP can be set through the GUI. Please refer to the manual for details. When the switch is set to 255 (FF), IP is automatically set, ignoring the setting. (DHCP function).
Example) in case SW2=5, SW1=7
5×16 + 7×1 = 87
therefore, IP 192.168.0.87
Connector
- 1. Power Connector(CN1)
-
NO. Function I/O 1 24VDC Input 2 GND Input ＊Be sure to supply power which is suitable for the load of I/O and control.
- 2. I/O Connector(CN1)
-
NO. Function I/O 1 24VDC Output 2 24VDC Output 3 SIGNAL I/O 4 SIGNAL I/O 5 SIGNAL I/O 6 SIGNAL I/O 7 SIGNAL I/O 8 SIGNAL I/O 9 SIGNAL I/O 10 SIGNAL I/O 11 GND Output 12 GND Output -
NO. Function I/O 1 24VDC Output 2 24VDC Output 3 SIGNAL I/O 4 SIGNAL I/O 5 SIGNAL I/O 6 SIGNAL I/O 7 SIGNAL I/O 8 SIGNAL I/O 9 SIGNAL I/O 10 SIGNAL I/O 11 GND Output 12 GND Output 
- 3. Ethernet Communication Connector(CN3)
-
NO. Function 1 TD+ 2 TD- 3 RD+ 4 ---- 5 ---- -
NO. Function 6 RD- 7 ---- 8 ---- Connector
hoodF.GND
Connector Specifications
- Connector specifications for cabling to module.
-
Purpose Item Part Number Manufacturer Power(CN2) Terminal Block MC421-38102 DECA - ※ Above connector is the most suitable product for the module applied. Another equivalent connector can be used.
Ezi-IO-PE-■32□-E / Ezi-IO-PE-I16O16□-E Series
Settings and Operation
Status LED
- 1. Status LED
-
Indication Color Function ON/OFF Condition PWR Red Power input indication Turn on when power is applied RUN Green Display module status Flashing when normal operation Link1, 2 Green Link Status Turn on when Link is activated ACT1, 2 Yellow Activity Status Flashing when communicating 0~31
0~15/0~15Green I/O status indication Input Module : Turn on when input signal is ON
Output Module : Turn on when output signal is ON
Switch
- 1. Ethernet IP Display and Setting Switch(SW1, SW2)
-
It can be set the value of the fourth digit of Ethernet IP through the setting switch. Set the product’s IP not to overlap with the connected products. The first, second and third values of IP can be set through the GUI. Please refer to the manual for details. When the switch is set to 255 (FF), IP is automatically set, ignoring the setting. (DHCP function)
Example) in case SW2=5, SW1=7
5×16 + 7×1 = 87
therefore, IP 192.168.0.87
Connector
- 1. Control Power Connector(CN1)
-
NO. Function I/O 1 24VDC Input 2 GND Input
- 2. I/O Connector(CN2)
-
NO. Function I/O 1 EXT_24VDC Output 2 NC ---- 3 EXT_GND Output 4 SIGNAL I/O
- 3. Ethernet Communication Connector(CN3)
-
NO. Function 1 TD+ 2 TD- 3 RD+ 4 ---- 5 ---- -
NO. Function 6 RD- 7 ---- 8 ---- Connector
hoodF.GND
- 4. I/O Power Connector(CN5)
-
NO. Function I/O 1 EXT_24VDC Input 2 EXT_24VDC Input 3 EXT_GND Input 4 EXT_GND Input ＊Be sure to supply a power source which is suitable for the load of I/O. 
Connector Specifications
- Connector specifications for cabling to module.
-
Purpose Item Part Number Manufacturer Control Power(CN1) Terminal Block MC421-38102 DECA I/O Power(CN5) Terminal Block MC421-38104 DECA I/O(CN2) e-CON Plug Connector CNE-P04-YW Autonics - ※ Above connector is the most suitable product for the module applied. Another equivalent connector can be used.
Ezi-IO-PE-■32□-T / Ezi-IO-PE-I16O16□-T Series
Settings and Operation
Status LED
- 1. Status LED
-
Indication Color Function ON/OFF Condition PWR Red Power input indication Turn on when power is applied RUN Green Display module status Flashing when normal operation Link1, 2 Green Link Status Turn on when Link is activated ACT1, 2 Yellow Activity Status Flashing when communicating 0~31
0~15/0~15Green I/O status indication Input Module : Turn on when input signal is ON
Output Module : Turn on when output signal is ON
Switch
- 1. Ethernet IP Display and Setting Switch(SW1, SW2)
-
It can be set the value of the fourth digit of Ethernet IP through the setting switch. Set the product’s IP not to overlap with the connected products. The first, second and third values of IP can be set through the GUI. Please refer to the manual for details. When the switch is set to 255 (FF), IP is automatically set, ignoring the setting. (DHCP function)
Example) in case SW2=5, SW1=7
5×16 + 7×1 = 87
therefore, IP 192.168.0.87
Connector
- 1. Control Power Connector(CN1)
-
NO. Function I/O 1 24VDC Input 2 GND Input
- 2. I/O Connector(CN1)
-
NO. Function I/O 1 EXT_24VDC Output 2 EXT_24VDC Output 3 SIGNAL I/O 4 SIGNAL I/O 5 SIGNAL I/O 6 SIGNAL I/O 7 SIGNAL I/O 8 SIGNAL I/O 9 SIGNAL I/O 10 SIGNAL I/O 11 EXT_GND Output 12 EXT_GND Output -
NO. Function I/O 1 EXT_24VDC Output 2 EXT_24VDC Output 3 SIGNAL I/O 4 SIGNAL I/O 5 SIGNAL I/O 6 SIGNAL I/O 7 SIGNAL I/O 8 SIGNAL I/O 9 SIGNAL I/O 10 SIGNAL I/O 11 EXT_GND Output 12 EXT_GND Output 
- 3. Ethernet Communication Connector(CN3)
-
NO. Function 1 TD+ 2 TD- 3 RD+ 4 ---- 5 ---- -
NO. Function 6 RD- 7 ---- 8 ---- Connector
hoodF.GND
- 4. I/O Power Connector(CN5)
-
NO. Function I/O 1 EXT_24VDC Input 2 EXT_24VDC Input 3 EXT_GND Input 4 EXT_GND Input ＊Be sure to supply a power source which is suitable for the load of I/O.
Connector Specifications
- Connector specifications for cabling to module.
-
Purpose Item Part Number Manufacturer Control Power(CN1) Terminal Block MC421-38102 DECA I/O Power(CN5) Terminal Block MC421-38104 DECA - ※ Above connector is the most suitable product for the module applied. Another equivalent connector can be used.