FASTECH
System Configuration
Ezi-SERVOⅡ EtherCAT
Type Signal Cable Encoder Cable Motor Cable Power Cable EtherCAT Cable
Length supplied - 30cm 30cm - -
Max. Length 20m 20m 20m 2m 100m
  • ※ Ezi-SERVOⅡ EtherCAT is stepping motor control system using EtherCAT, high speed Ethernet(100Mbps Full-Duplex) based fieldbus. Ezi-SERVOⅡ EtherCAT is EtherCAT slave module which support CAN application layer over EtherCAT(CoE). CiA 402 Drive profile implemented. Supported modes are Profile Position Mode, Homing Mode, Cyclic Synchronous Position Mode.
  • ※ Please refer to the Ezi-SERVOⅡ EtherCAT catalog for optional cables, functions and operation.



Ezi-SERVOⅡ EtherCAT_ 86mm
Type Signal Cable Encoder Cable Motor Cable Power Cable EtherCAT Cable
Length supplied - 30cm 30cm - -
Max. Length 20m 20m 20m 2m 100m
  • ※ Ezi-SERVOⅡ EtherCAT is stepping motor control system using EtherCAT, high speed ethernet(100Mbps Full-Duplex) based fieldbus. Ezi-SERVOⅡ EtherCAT is EtherCAT slave module which support CAN application layer over EtherCAT(CoE). CiA 402 Drive profile implemented. Supported modes are Profile Position Mode, Homing Mode, Cyclic Synchronous Position Mode.
  • ※ Please refer to the Ezi-SERVOⅡ EtherCAT catalog for optional cables, functions and operation.



Ezi-SERVOⅡ EtherCAT MINI
Type Signal Cable Encoder Cable Motor Cable Power Cable EtherCAT Cable
Length supplied - 30cm 30cm - -
Max. Length 20m 20m 20m 2m 100m
  • ※ Ezi-SERVOⅡ EtherCAT MINI is stepping motor control system using EtherCAT, high speed Ethernet(100Mbps full-duplex) based fieldbus. Ezi-SERVOⅡ EtherCAT MINI is EtherCAT slave module which support CAN application layer over EtherCAT(CoE). CiA 402 Drive profile implemented. Supported modes are Profile Position Mode, Homing Mode, Cyclic Synchronous Position Mode.
  • ※ Please refer to the Ezi-SERVOⅡ EtherCAT MINI catalog for optional cables, functions and operation.



Ezi-SERVOⅡ EtherCAT 4X
Type Signal Cable Encoder Cable Motor Cable Control Power Cable Main Power Cable EtherCAT Cable
Length supplied - 30cm 30cm - - -
Max. Length 20m 20m 20m 2m 2m 100m
  • ※ Ezi-SERVOⅡ EtherCAT 4X is 4 axes stepping motor control system using EtherCAT, high speed ethernet(100Mbps Full-Duplex) based fieldbus. Ezi-SERVOⅡ EtherCAT 4X is EtherCAT slave module which support CAN application layer over EtherCAT(CoE). CiA 402 Drive profile implemented. Supported modes are Profile Position Mode, Homing Mode, Cyclic Synchronous Position Mode.
  • ※ Please refer to the Ezi-SERVOⅡ EtherCAT 4X catalog for optional cables, functions and operation.



Ezi-SERVOⅡ EtherCAT 8X
Type Signal Cable Encoder Cable Motor Cable Control Power Cable Main Power Cable EtherCAT Cable
Length supplied - 30cm 30cm - - -
Max. Length 20m 20m 20m 2m 2m 100m
  • ※ Ezi-SERVOⅡ EtherCAT 8X is 8 axes stepping motor control system using EtherCAT, high speed ethernet(100Mbps Full-Duplex) based fieldbus. Ezi-SERVOⅡ EtherCAT 8X is EtherCAT slave module which support CAN application layer over EtherCAT(CoE). CiA 402 Drive profile implemented. Supported modes are Profile Position Mode, Homing Mode, Cyclic Synchronous Position Mode.
  • ※ Please refer to the Ezi-SERVOⅡ EtherCAT 8X catalog for optional cables, functions and operation.



Ezi-SERVOⅡ Plus-E
Type Signal Cable Encoder Cable Motor Cable Power Cable Ethernet 케이블
Length supplied - 30cm 30cm - -
Max. Length 20m 20m 20m 2m 100m
  • ※ Ezi-SERVOⅡ Plus-E drive can drive up to 254 axes through Ethernet communication with master controller such as PC. Ethernet HUB is built-in and can be connected in Daisy-chain form. All motion control functions can be controlled through network communication and motion related conditions(eg. acceleration/deceleration time, etc.) are stored in the ROM as parameters. A motion library(DLL) is provided for programming under Windows XP/7/8/10.
  • ※ Please refer to the Ezi-SERVOⅡ Plus-E catalog for optional cables, functions and operation.



Ezi-SERVOⅡ Plus-E_ 86mm
Type Signal Cable Encoder Cable Motor Cable Power Cable Ethernet 케이블
Length supplied - 30cm 30cm - -
Max. Length 20m 20m 20m 2m 100m
  • ※ Ezi-SERVOⅡ Plus-E drive can drive up to 254 axes through Ethernet communication with master controller such as PC. Ethernet HUB is built-in and can be connected in Daisy-chain form. All motion control functions can be controlled through network communication and motion related conditions(eg. acceleration/deceleration time, etc.) are stored in the ROM as parameters. A motion library(DLL) is provided for programming under Windows XP/7/8/10.
  • ※ Please refer to the Ezi-SERVOⅡ Plus-E catalog for optional cables, functions and operation.



Ezi-SERVOⅡ Plus-E MINI
Type Signal Cable Encoder Cable Motor Cable Power Cable Ethernet 케이블
Length supplied - 30cm 30cm - -
Max. Length 20m 20m 20m 2m 100m
  • ※ Ezi-SERVOⅡ Plus-E MINI drive can drive up to 254 axes through Ethernet communication with master controller such as PC. Ethernet HUB is built-in and can be connected in Daisy-chain form. All motion control functions can be controlled through network communication, and motion related conditions(eg. acceleration/deceleration time, etc.) are stored in the ROM as parameters. A motion library(DLL) is provided for programming under Windows 7/8/10.
  • ※ Please refer to the Ezi-SERVOⅡ Plus-E MINI catalog for optional cables, functions and operation.



Ezi-SERVOⅡ CC-Link
Type Signal Cable Encoder Cable Motor Cable Power Cable CC-Link Cable RS-485 Cable
Length supplied - 30cm 30cm - - -
Max. Length 20m 20m 20m 2m 100m 2m
  • ※ Ezi-SERVOⅡ CC-Link is a drive supporting CC-Link , a high speed fieldbus(max. 10Mbps). Ezi-SERVOⅡ CC-Link is a Remote Device module supporting CC-Link network. Multi-function control is possible by occupying 1 station and 2 stations in CC-Link, and motion and monitoring functions are processed by device commands.
  • ※ Please refer to the Ezi-SERVOⅡ CC-Link catalog for optional cables, functions and operation.



Ezi-SERVOⅡ CC-Link_ 86mm
Type Signal Cable Encoder Cable Motor Cable Power Cable CC-Link Cable RS-485 Cable
Length supplied - 30cm 30cm - - -
Max. Length 20m 20m 20m 2m 100m 2m
  • ※ Ezi-SERVOⅡ CC-Link is a drive supporting CC-Link , a high speed fieldbus(max. 10Mbps). Ezi-SERVOⅡ CC-Link is a Remote Device module supporting CC-Link network. Multi-function control is possible by occupying 1 station and 2 stations in CC-Link, and motion and monitoring functions are processed by device commands.
  • ※ Please refer to the Ezi-SERVOⅡ CC-Link catalog for optional cables, functions and operation.



Ezi-SERVO ST
Type Signal Cable Encoder Cable Motor Cable Power Cable
Length supplied - 30cm 30cm -
Max. Length 20m 20m 20m 2m
  • ※ Ezi-SERVO ST is a pulse input type drive. It is controlled by using of Motion controller, standalone controller or PLC(with positioning module).
  • ※ Please refer to the Ezi-SERVO ST catalog for optional cables, functions and operation.



Ezi-SERVO ST_ 86mm
Type Signal Cable Encoder Cable Motor Cable Power Cable
Length supplied - 30cm 30cm -
Max. Length 20m 20m 20m 2m
  • ※ Ezi-SERVO ST is a pulse input type drive. It is controlled by using of Motion controller, standalone controller or PLC(with positioning module).
  • ※ Please refer to the Ezi-SERVO ST catalog for optional cables, functions and operation.



Dimensions of Home-sensor Installation
RB-HG60
RB-HG100
RB-HG130S
RB-HG170S-60L
RB-HG170S-86L