Drive Specification
| Motor Model | BM-20 series | BM-28 series | BM-42 series | BM-56 series | BM-60 series | BM-86 series | |
|---|---|---|---|---|---|---|---|
| Drive Model | EzT-NDR- 20 series |
EzT-NDR- 28 series |
EzT-NDR- 42 series |
EzT-NDR- 56 series |
EzT-NDR- 60 series |
EzT-NDR- 86 series |
|
| Input Voltage | 24VDC ±10% | 40 ~ 70VDC | |||||
| Control Method | Bipolar PWM drive with 32bit MCU | ||||||
| Multi Axes Drive | Maximum 16 axes through Daisy-Chain | ||||||
| Position Table | 256 motion command steps (Continuous, Wait, Loop, Jump and External start etc.) | ||||||
| Current Comsumption | Max 500mA (Except motor current) | ||||||
| Operating Condition | Ambient Temperature | · In Use: 0~50˚C · In Storage: -20~70˚C |
|||||
| Humidity | · In Use: 35~85% RH (Non-Condensing) · In Storage: 10~90% RH (Non-Condensing) |
||||||
| Vib. Resist | 0.5g | ||||||
| Function | Rotation Speed | 0~3,000 [rpm]*1 | |||||
| Resolution [ppr] |
500 1,000 1,600 2,000 3,200 3,600 4,000 5,000 6,400 8,000 10,000 20,000 25,000 36,000 40,000 50,000 (Selectable by parameter) * Default : 10,000 |
||||||
| Protection Functions | Over Current Error, Over Speed Error, Step Out Error, Over Temperature Error, Over Regenerated Voltage Error, Motor Connect Error, Motor Voltage Error, System Error, ROM Error | ||||||
| LED Display | Power(Green), Alarm(Red), CW Rotation(Yellow), CCW Rotation(Orange) | ||||||
| STOP Current | 10%~100% (Selectable by parameter) Current after 0.1 second after motor stop. * Default : 50% |
||||||
| Rotational Direction | CW/CCW (Selectable by parameter) Used when changing the direction of motor rotate. * Default : CW |
||||||
| I/O Signal | Input Signal | 3 dedicated inputs (LIMIT+, LIMIT-, ORIGIN), 9 programmable inputs (Photocoupler) | |||||
| Output Signal | 1 dedicated output (Compare Out), 9 programmable outputs (Photocoupler), Brake | ||||||
| Communication Interface | RS-485 serial communication Communication speed: 9,600~921,600 [bps] |
||||||
| Position Control | · Incremental mode / Absolute mode Data Range: -134,217,728 to +134,217,727 [pulse] · Operating speed: Max. 3,000 [rpm] |
||||||
| Return to Origin | Origin Sensor, ±Limit sensor, Z phase (By external encoder) | ||||||
| GUI | User Interface Program within Windows | ||||||
| Software | Motion Library (DLL) for Windows 7/8/10 | ||||||
System Configuration
Ezi-STEP Plus-R
Ezi-STEP Plus-R 86mm
External Wiring Diagram
Ezi-STEP Plus-R
[CAUTION] Please refer to the Manual when connects motor extension cable. Careful connection will be required to protect the drive from any damages.
* When connects I/O cable between controller and drive, please turn off the power of both controller and drive, in order to protect the drive from any damage.
Ezi-STEP Plus-R 86mm
[CAUTION] Please refer to the Manual when connects motor extension cable. Careful connection will be required to protect the drive from any damages.
* When connects I/O cable between controller and drive, please turn off the power of both controller and drive, in order to protect the drive from any damage.