Specifications of Controller
Ezi-MOTIONLINK Plus-E
| Input Voltage | 24VDC ±10% | |
| Data Range | -134,217,728 ~ +134,217,727 [pulse] (28bit) | |
| Type of Acc/Dec | Symmetric / Asymmetric trapezoidal acceleration & deceleration | |
| Command pulse output method | 2 pulse mode (CW/CCW) or 1 pulse mode (Pulse/Dir) (Selected by parameter) |
|
| Max. Output Freguency | 5MHz | |
| Encoder Max. Input Freguency | 4MHz | |
| Input Signal | 3 dedicated inputs (LIMIT+, LIMIT-, ORIGIN), 1 programmable inputs (photocoupler) | |
| Output Signal | 1 programmable outputs(photocoupler), Brake | |
| Rotational Direction | CW/CCW (Selected by parameter) | |
| 7-Segment | IP address, Alarm status | |
| Communication Interface | Ethernet communication, Dual port Ethernet switch embeded, Communication speed: 10/100 Base - T/TX Full-Duplex | |
| Multi Axes Drive | Maximum 254 axis operating with default configuration(Selectable IP: 1~254) | |
| Multi Axes Drive | Origin Sensor, Z phase, ±Limit sensor | |
| GUI | User Interface Program within Windows | |
| Library | Motion Library (DLL) for windows 7/8/10 | |
| Operating Condition | Ambient Temperature | · In Use: 0~55˚C · In Storage: -20~70˚C |
| Humidity | · In Use: 35~85% RH (Non-condensin) · In Storage: 10~90% RH (Non-condensin) |
|
| Vib. Resist. | 0.5g | |
Dimensions of Controller[mm]
Ezi-MOTIONLINK Plus-E
System Configuration
Ezi-MOTIONLINK Plus-E
External Wiring Diagram
Ezi-MOTIONLINK Plus-E
※ When connects I/O cable between controller and drive, please turn off the power of both controller and drive, in order to protect
the drive from any damage.