| Title | Request for quote HDTT motors |
| Name | Christer Häll |
| Country | |
| Company | 0 |
| Telephone | -FlexLink AB |
| Christer.hall@flexlink.com | |
|
Dear Fastech,
My name is Christer Häll and working as Category buyer at FlexLink AB in Gothenburg. We have since many month been working on a new Platform for our business. We have come to a position with our technical specified requirements, that we would like to invite potential suppliers into a quotation process. We would like to take this project one step further and would like to send this RFQ to Fastech, by this reason I hereby sending you our Motor specification HDTT, two different types of motors: 1. Drive motor for single track transfer conveyor 2. Function motors for miscellaneous device, (e.g. lifting) FlexLink hope by our specification receiving your offer and by this creating next step of cooperation. We hope that all requests can be met, if any deviation please let us know immediatel Looking forward on your reply together with attached quotation. Many regards Christer Häll Motor specification, HDTT Background: FlexLink has pointed out the future strategy which includes the standardized controls concept. This means that FlexLink devices (FDP) is going to be used for controlling parts of a line. If this should be an attractive solution the whole controls hierarchy has to be under consideration. This starts with the components at the lowest level and end up with the line controller on the top level. For the project HDTT there is also a requirement of replacing pneumatics with electric movements. Because of this there is a need of many function motors in this platform. These function motors these could later be reused in other platforms. All motors can be dived into three different categories: Motor types Drive motor for twin track conveyors This category is not under consideration in this specification. Drive motors for single track transfer conveyor Communication: - Priority 1: CAN-open (adjustable physically with a mechanical potentiometer “on/off” with NOD addressing. - Priority 2: (RS485/RS232) - Priority 3: (Discrete signals) Max. Installation size square 60x60 mm Drive: Preferred integrated on the motor, alternative divided solution drive and motor Control: Constant speed, constant acceleration ramp, speed mode, torque limit. Encoder feedback: Needed, preset 0 position. Connectors: 2m cable included with motor (power and signal). IP class: IP54 is required, but IP65 big advantage. Outgoing axis (Motor or gear): D-shape Power supply: Priority 24V DC Torque: minimum 3,5 Nm in motion 105 rpm but 2,5Nm to be considered Speed: 7-105 rpm Class: CE-classified is demanded, UL is an advantage Potential yearly volume: Year 1 = 400, Year 2 = 1200, Year 3 = 2400. Function motors for miscellaneous device, (e.g. lifting) Communication: - Priority 1: CAN-open (adjustable physically with a mechanical potentiometer “on/off” with NOD addressing. - Priority 2: (RS485/RS232) - Priority 3: (Discrete signals) Max. Installation size square 60x60 mm. Drive: Motor and gearbox integrated. Control: constant speed, constant acceleration ramp, speed mode (used as positioning with a sensor), torque mode Encoder feedback: No sensors needed. Connectors: 2m cable included with motor (power and signal). IP class: IP54 is required, but IP65 big advantage. Outgoing axis: Double D-shape, key track Power supply: - Priority1: 24V DC Torque: 10 Nm in motion 100 rpm Speed: Very low. Approximately 2-100 rpm Class: CE-classified is demanded, UL is an advantage Potential yearly volume: Year 1 = 200, Year 2 = 600, Year 3 = 1200. Would like to receive your quotation latest: 2017-10-06 Christer Häll Category Buyer Global Purchasing FlexLink Product & Supply Division 415 50 Gothenburg – Sweden Telephone +46 -31-337 15 34 christer.Hall@flexlink.com |
|
| Files | +46 31 371534 |
| Delete Modify List |