Ezi-IO Plus-R

Settings and Operation

Status LED

1. Status LED
Indication Color Function ON/OFF Condition
24V Red Ext 24V Power LED is turned ON when power is applied
0~15 Green In/Out status Input On: Input signal On
Output On: Output signal On

Switch

1. Network ID Setting Switch(SW1)
1) Unique ID setting for each module
2) Total 16 number setting (0~F)
Position ID Number
0*1 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
Position ID Number
8 8
9 9
A 10
B 11
C 12
D 13
E 14
F 15
  • *1 : Default settings
2. Communication Speed and Termination Setting Switch(SW2)

Termination Setting Switch(SW2.1)
The module installed at the end of the network must be terminated for reliable operation. Please termination setting switch is ON if module installed at the end of the network.

Speed Setting Switch(SW2.2~SW2.4)
SW2.2~SW2.4 used for setting speed as follows

SW2.1 SW2.2 SW2.3 SW2.4 Baud Rate [bps]
- OFF OFF OFF 9,600
- ON OFF OFF 19,200
- OFF ON OFF 38,400
- ON ON OFF 57,600
- OFF OFF ON 115,200*1
- ON OFF ON 230,400
- OFF ON ON 460,800
- ON ON ON 921,600
  • *1 : Default setting value

Connector

1. I/O Connector(CN1)
◆ Input Module
NO. Function I/O
1 EXT_24VDC Input
2 EXT_24VDC Input
3 Input0 Input
4 Input1 Input
5 Input2 Input
6 Input3 Input
7 Input4 Input
8 Input5 Input
9 Input6 Input
10 Input7 Input
NO. Function I/O
11 Input8 Input
12 Input9 Input
13 Input10 Input
14 Input11 Input
15 Input12 Input
16 Input13 Input
17 Input14 Input
18 Input15 Input
19 EXT_GND Input
20 EXT_GND Input
◆ Output Module
NO. Function I/O
1 EXT_24VDC Input
2 EXT_24VDC Input
3 Output0 Output
4 Output1 Output
5 Output2 Output
6 Output3 Output
7 Output4 Output
8 Output5 Output
9 Output6 Output
10 Output7 Output
NO. Function I/O
11 Output8 Output
12 Output9 Output
13 Output10 Output
14 Output11 Output
15 Output12 Output
16 Output13 Output
17 Output14 Output
18 Output15 Output
19 EXT_GND Input
20 EXT_GND Input
◆ I/O Module
NO. Function I/O
1 EXT_24VDC Input
2 EXT_24VDC Input
3 Input0 Input
4 Input1 Input
5 Input2 Input
6 Input3 Input
7 Input4 Input
8 Input5 Input
9 Input6 Input
10 Input7 Input
NO. Function I/O
11 Output0 Output
12 Output1 Output
13 Output2 Output
14 Output3 Output
15 Output4 Output
16 Output5 Output
17 Output6 Output
18 Output7 Output
19 EXT_GND Input
20 EXT_GND Input
2. Power Connector(CN2)
NO. Function I/O
1 24VDC Input
2 GND Input
3. RS-485 Communication Connector(CN3)
NO. Function
1 GND
2 GND
3 Data+
4 GND
5 GND
NO. Function
6 Data-
7 GND
8 GND
LED 1, 3 Module status
LED 2, 4 Communication status

Connector Specifications

Connector specifications for cabling to module.
Purpose Item Part Number Manufacturer
Power
(CN2)
Terminal Block ESC250V-02P DINKLE
I/O
(CN1)
Terminal Block ESC250V-20P DINKLE
※ Above connector is the most suitable product for the module applied. Another equivalent connector can be used.