BT Type

Setting & Operation

Status Monitor LED

1. Status Monitor LED
Indication Color Function ON/OFF Condition
PWR Green Power Input Indication Lights when power is ON Flashs when motor is Free status.
ALM Red Alarm Indication Flash when protection function is activated (Identifiable which protection mode is activated by counting the blinking times)
◆ Protection functions and LED flash times
Time Protection Conditions
1 Over Current Error The current through power devices in drive exceeds the limit value*1
2 Over Speed Error Motor speed exceed 3,000 [rpm]
3 Step Out Error Abnormally motor do not followed pulsed input
5 Over Temperature Error Inside temperature of drive exceeds 85℃
6 Over Regeneratived Voltage Error Back-EMF more high limit value
BT-42/56 series: 50V, BT-86 series: 90V
7 Motor Connect Error The power is ON without connection of the motor cable to drive
9 Motor Voltage Error Motor voltage is out of limited value
BT-42/56 series: 20V, BT-86 series: 36V
11 System Error Error occurs in drive system
12 ROM Error Error occurs in parameter storage device(ROM)
  • *1 : Limit value depends on motor model (Refer to the Manual)
Alarm LED flash
(Ex, Step Out Error)

Connector

1. Power Connector(CN1)
NO. Function I/O
1 24VDC Input
2 GND Input
3 F.GND Input
4 NC ----
※ BT-42, BT-56 series
NO. Function I/O
1 40~70VDC Input
2 GND Input
※ BT-86 series
2. Input/Output Signal Connector(CN2)
No. Function I/O
1 CW+(Pulse+) Input
2 CW-(Pulse-) Input
3 CCW+(Dir+) Input
4 CCW-(Dir-) Input
5 Alarm Output
6 EXT_GND Input
7 EXT_24VDC Input
8 Alarm Reset Input
9 RUN/STOP Output
10 F.GND ----
3. Parameter Setting Connector(CN3)
No. Function I/O
1 Tx Output
2 Rx Input
3 GND ----

Connector Specifications

Connector specifications for cabling to drive.
Purpose Item Part Number Manufacturer
Power
(CN1)
BT-42/56
series
Housing
Terminal
5557-04R
5556T
MOLEX
BT-86
series
Housing
Terminal
3191-2R
1381T
MOLEX
Signal
(CN2)
Housing
Terminal
XADRP-10V
SXA-001T-P0.6
JST
Parameter Setting Drive Side
(CN3)
Housing
Terminal
5261-03
5263
MOLEX
PC Side D-SUB Connector
Terminal
717SD-ESD9S
7E-1675-09
AMPHENOL
※ Above connector is the most suitable product for the drive applied. Another equivalent connector can be used.